Welcome to Friends of Prasar Bharati

Technical article · Broadcasting engineering

Direct-to-Mobile Broadcasting: The Next Technological Revolution in Indian Broadcasting

Prasar Bharati’s D2M initiative, ATSC 3.0 technology, RF transmission architecture and the future of Akashvani and Doordarshan.

November 2026

Contents

Abstract

The rapid growth of smartphones and mobile video consumption is transforming the global broadcasting industry. Traditional terrestrial television and radio broadcasting systems are increasingly required to adapt to changing audience behaviour and emerging digital technologies. In this context, Direct-to-Mobile (D2M) broadcasting represents a significant technological development that can deliver live audio, video and multimedia content directly to compatible mobile devices without requiring mobile internet connectivity or a SIM card.

Prasar Bharati, in collaboration with the Indian Institute of Technology (IIT), Kanpur, has undertaken initiatives to develop a next-generation terrestrial broadcasting ecosystem based on emerging digital broadcasting standards. The Indian D2M initiative, based on ATSC 3.0 technology, seeks to combine the efficiency of conventional broadcasting with the flexibility of modern digital communication systems.

This article examines the technical principles of D2M, its transmission architecture, OFDM modulation, ATSC 3.0 technology, HPHT and LPLT transmission networks, Single Frequency Network operation, spectrum utilisation and potential applications. It also discusses the implications for existing Akashvani and Doordarshan infrastructure, broadcasting engineers and the future of public service broadcasting in India.

Keywords

  • Direct-to-Mobile
  • D2M
  • Prasar Bharati
  • ATSC 3.0
  • OFDM
  • HPHT
  • LPLT
  • SFN
  • Digital Terrestrial Broadcasting
  • Broadcast Radio Head
  • Akashvani
  • Doordarshan

Section 1Introduction: The Changing Broadcasting Landscape

For decades, terrestrial radio and television broadcasting have played an important role in delivering information, education, entertainment and news to the Indian population. Akashvani and Doordarshan have traditionally relied on broadcasting infrastructure consisting of studios, audio-video processing systems, transmitters, antennas, microwave links, satellite communication facilities and terrestrial transmission networks.

However, the rapid expansion of smartphones, broadband connectivity, OTT platforms and digital streaming services has significantly changed audience behaviour. Today, a substantial proportion of television and video consumption takes place through mobile phones. This has created a new challenge for traditional broadcasters.

Internet-based streaming follows a one-to-one communication model in which individual users receive separate data streams. When millions of people watch the same live event, substantial network capacity is required.

Direct-to-Mobile broadcasting offers an alternative. Instead of delivering separate streams to individual users, one broadcasting transmitter can distribute the same content simultaneously to an unlimited number of compatible receiving devices within its coverage area. This makes D2M particularly attractive for live television, sports events, emergency communication, educational programming and public information services.

For Prasar Bharati, D2M is not merely another distribution platform. It could become an important component of India’s next-generation broadcasting infrastructure.

Section 2Prasar Bharati and IIT Kanpur: Development of D2M Technology

Prasar Bharati entered into a collaboration with IIT Kanpur in 2019 to explore next-generation broadcasting technologies. The collaboration was formally developed through a Memorandum of Understanding and a Centre of Excellence initiative at IIT Kanpur in 2021.

The major research areas included:

  1. Direct-to-Mobile broadcasting.
  2. Convergence with emerging 5G standards.
  3. Artificial intelligence and advanced audio-video processing.
  4. Automatic speech recognition for multilingual subtitling.
  5. Advanced retrieval of archived broadcasting content.

Proof-of-Concept trials were conducted in Bengaluru and Delhi. An important feature of the Delhi trials was the hybrid transmission architecture involving:

  • High Power High Tower (HPHT) transmission facilities.
  • Low Power Low Tower (LPLT) transmission facilities.
  • Broadcast Radio Head (BRH) equipment.
  • ATSC 3.0-based digital terrestrial transmission technology.

In November 2025, Prasar Bharati published technical test reports concerning interference with mobile communication services and the temperature of mobile receiving devices during D2M operation in the 470–582 MHz frequency range. These evaluations were important in addressing concerns regarding coexistence between broadcasting and mobile communication networks.

The project subsequently progressed towards preparation of a Detailed Project Report and a proposed Public-Private Partnership implementation model. The Delhi field trial was also reported as a three-year hybrid HPHT/LPLT ATSC 3.0 demonstration in May 2026.

Section 3What Makes D2M Different from Conventional Broadcasting?

The fundamental difference between conventional internet streaming and D2M lies in the method of content distribution.

Conventional internet streaming

In an internet-based system:

  • Content originates from a server.
  • Users connect through mobile or broadband networks.
  • Each user receives an individual data stream.
  • Network capacity increases with the number of simultaneous viewers.
  • Service quality depends on network congestion and internet availability.

Direct-to-Mobile broadcasting

In D2M:

  • Content originates from a broadcasting studio or content distribution centre.
  • Audio and video signals are encoded and multiplexed.
  • The multiplexed signal is transmitted through terrestrial broadcasting infrastructure.
  • Compatible mobile devices receive the same broadcast signal.
  • No individual internet connection is required to receive the broadcast content.

The same transmission can serve thousands or millions of receivers without a corresponding increase in transmitter bandwidth. This is the principal engineering advantage of broadcasting over individual unicast streaming.

Section 4Technical Architecture of an ATSC 3.0-Based D2M System

The D2M architecture can be divided into five major sections.

  1. Content generation and studio infrastructureProgrammes are generated, processed and compressed at the broadcasting centre.
  2. Encoding and multiplexingEncoded content is carried in IP-based streams and organised into services.
  3. ATSC 3.0 transmission systemThe digital content is processed and the RF signal is generated.
  4. RF transmission networkThe signal is radiated from HPHT, LPLT or BRH sites, or a hybrid of them.
  5. Mobile receiving systemCompatible hardware and software receive and decode the signal.

4.1Content generation and studio infrastructure

The system begins with programme generation at the broadcasting centre. Sources may include:

  • Akashvani studios
  • Doordarshan studios
  • News production centres
  • Regional broadcasting centres
  • Educational and government content providers
  • Authorised private broadcasters

Audio and video programmes are processed, compressed and prepared for digital distribution.

4.2Encoding and multiplexing

The audio and video signals are digitally encoded. ATSC 3.0 supports modern compression technologies, including HEVC for video and advanced audio coding systems.

The encoded content is encapsulated into IP-based broadcast delivery streams and organised into services. Multiple television, audio and data services can be transmitted through a common RF channel, subject to the available capacity and selected transmission parameters.

4.3ATSC 3.0 transmission system

The transmission system processes the digital content and generates the RF signal. Important functional blocks include:

  • Broadcast gateway
  • Physical-layer processing
  • OFDM modulation
  • Forward Error Correction (FEC)
  • Digital exciter
  • RF power amplifier
  • Transmitter output filtering
  • Antenna and feeder system

4.4RF transmission network

The RF signal is radiated through a broadcasting antenna system. Depending on the network design, transmission may be performed using:

  • Existing high-power terrestrial transmitter installations.
  • Low-power distributed transmitter locations.
  • Broadcast Radio Heads.
  • Hybrid HPHT/LPLT networks.

4.5Mobile receiving system

The receiving device requires suitable hardware capable of receiving and decoding the D2M signal. A compatible mobile receiver generally requires:

  • Appropriate receiving antenna
  • RF front-end circuitry
  • Tuner and channel selection
  • ATSC 3.0-compatible baseband processing
  • OFDM demodulation
  • Error correction
  • Audio-video decoding
  • Display and playback software

Important: D2M reception is not automatically possible on every existing smartphone. Device manufacturers must provide compatible receiving hardware and software support.

Section 5Understanding ATSC 3.0 Technology

ATSC 3.0 is an advanced digital terrestrial television broadcasting standard developed by the Advanced Television Systems Committee. It represents a major technological evolution from earlier terrestrial television systems.

Unlike traditional broadcasting architectures, ATSC 3.0 incorporates IP-based content delivery and an advanced physical transmission layer. Its important features include:

  1. OFDM-based modulation
  2. Advanced error correction
  3. Flexible modulation and coding
  4. Multiple physical-layer pipes
  5. IP-based content delivery
  6. Support for advanced video and audio
  7. Improved mobile reception capabilities
  8. Support for Single Frequency Networks

The technology is particularly suitable for modern terrestrial broadcasting because of its flexibility in handling different reception environments.

For D2M, this flexibility is important because the receiving devices are not fixed television receivers. They may be smartphones moving through urban streets, buildings, vehicles and rural areas.

Section 6OFDM: The Heart of Modern Digital Broadcasting

Orthogonal Frequency Division Multiplexing (OFDM) is one of the most important technologies enabling advanced digital terrestrial broadcasting.

In conventional single-carrier transmission, information is transmitted through a single high-speed carrier. OFDM divides the available channel bandwidth into a large number of closely spaced orthogonal subcarriers. Each subcarrier carries a portion of the information.

The important principle is that the subcarriers are mathematically orthogonal to one another, allowing their spectra to overlap without causing inter-carrier interference under ideal synchronisation conditions.

Overlapping spectra of orthogonal OFDM subcarriers Seven overlapping subcarrier spectra side by side. At the centre frequency of each subcarrier, where it peaks, every other subcarrier passes through zero. Frequency →
Figure 1Orthogonal subcarriers. Each subcarrier’s spectrum peaks exactly where every other subcarrier passes through zero (dotted lines), so the spectra can overlap closely without interfering, under ideal synchronisation.

Advantages of OFDM

AResistance to multipath fading

In mobile reception, the transmitted signal may reach the receiving antenna through multiple paths due to reflection, diffraction and scattering. These delayed signals can cause frequency-selective fading and inter-symbol interference. OFDM, together with an appropriate guard interval, provides improved tolerance to multipath propagation.

BEfficient spectrum utilisation

Orthogonal subcarriers can be placed close together, allowing efficient use of the allocated channel bandwidth.

CFlexible modulation

Different modulation orders and coding rates can be selected according to coverage and capacity requirements.

DSuitability for mobile reception

OFDM can be configured to provide robust reception under challenging propagation conditions.

Transmitter

  1. Digital input data
  2. Channel coding / FEC
  3. Bit and symbol mapping
  4. Serial to parallel conversion
  5. IFFT
  6. Guard interval addition
  7. Digital to analogue conversion
  8. RF upconversion
  9. Power amplifier
  10. Transmitting antenna

Receiver

  1. Receiving antenna
  2. RF downconversion
  3. Analogue-to-digital conversion
  4. Synchronisation
  5. Guard interval removal
  6. FFT processing
  7. Demapping
  8. Error correction
  9. Recovered data

IFFT at the transmitter, FFT at the receiverGuard interval added, then removed

Figure 2Simplified OFDM block diagram. At the receiver, the reverse process is performed using RF downconversion, analogue-to-digital conversion, synchronisation, guard interval removal, FFT processing, demapping and error correction.

Why is OFDM important for D2M?

A mobile receiver frequently encounters changing signal strength and multipath propagation. OFDM provides the physical-layer flexibility required to deliver reliable digital broadcasting in such environments.

It is also particularly useful in SFN networks, where multiple geographically separated transmitters operate on the same frequency.

Section 7HPHT and LPLT: The Hybrid Transmission Architecture

One of the most important engineering features of the Indian D2M initiative is the use of a hybrid transmission network.

7.1High Power High Tower (HPHT)

HPHT systems use high-power transmitters installed at elevated locations. Their principal advantages are:

  • Large geographical coverage.
  • Efficient utilisation of existing broadcasting sites.
  • Reduced requirement for numerous individual transmitter locations.
  • Suitability for rural and wide-area broadcasting.

Existing terrestrial broadcasting infrastructure could potentially provide a foundation for this architecture, subject to equipment and antenna compatibility.

7.2Low Power Low Tower (LPLT)

LPLT systems use relatively low-power transmitters installed at strategically selected locations. They are particularly useful for:

  • Urban coverage improvement.
  • Indoor reception enhancement.
  • Filling coverage gaps.
  • Densely populated locations.
  • Areas affected by shadowing from buildings and terrain.

A distributed LPLT network can improve signal availability where a distant high-power transmitter alone may not provide sufficient reception.

7.3Why combine HPHT and LPLT?

A high-power transmitter provides broad geographical coverage, while multiple low-power transmitters improve local reception. Combining both systems can provide a more efficient coverage architecture.

This approach is particularly relevant to mobile broadcasting because smartphone antennas are generally less efficient than large external television receiving antennas.

Section 8Single Frequency Network (SFN): A Major Engineering Advantage

A Single Frequency Network is a transmission arrangement in which multiple geographically separated transmitters radiate the same synchronised programme signal using the same RF channel.

In a conventional multi-frequency network, different transmitters may use different frequencies to avoid interference. In an SFN, the same frequency is reused across the network. This can significantly improve spectrum efficiency.

A hybrid HPHT and LPLT single frequency network A tall high-power tower covers a wide area. Two low-power towers among city buildings cover smaller areas. A satellite provides a GNSS timing reference to all three towers. A phone receives signals from both the high tower and a nearby low tower on the same channel. HPHT LPLT LPLT GNSS timing reference Phone
Figure 3A hybrid HPHT/LPLT single frequency network, in outline. The high tower covers a wide area; low-power sites among the buildings fill gaps. All of them radiate the same programme on the same RF channel, kept in step by a common timing reference, so a phone can receive signals from more than one site.

Working principle

  1. The same programme stream is distributed to all participating transmitters.
  2. Each transmitter receives a synchronised signal.
  3. The transmitters operate on the same assigned RF frequency.
  4. Their transmissions are synchronised using a common timing reference.
  5. The receiver can receive signals from more than one transmitter within the designed SFN operating conditions.

The receiver can benefit from multiple signal contributions rather than experiencing conventional co-channel interference, provided the network is correctly engineered.

Important SFN engineering requirements

  • Accurate frequency synchronisation
  • Precise timing synchronisation
  • Appropriate guard interval
  • Proper transmitter power balancing
  • Accurate network delay management
  • Correct geographical planning
  • Careful antenna pattern design

GNSS-based timing references and network distribution systems can be used to achieve the required synchronisation.

The hybrid HPHT/LPLT architecture demonstrated in Delhi is particularly significant because it combines broad-area and local-area coverage using an SFN approach.

Section 9RF Engineering Considerations for D2M Deployment

For broadcasting engineers, D2M will introduce several important technical planning requirements.

9.1Frequency planning

The proposed Indian D2M framework has considered the 470–582 MHz frequency range. Frequency planning must take into account:

  • Existing terrestrial television assignments.
  • Adjacent-channel interference.
  • Co-channel interference.
  • Mobile communication services.
  • Transmitter power and antenna characteristics.
  • National and international spectrum coordination requirements.

9.2Link budget calculation

A link budget is essential for determining whether sufficient signal power will be available at the mobile receiver. The basic received power relationship is:

Pr = Pt + Gt + Gr − LFS − Lsystem

Where:

Pr
Received power in dBm
Pt
Transmitter power in dBm
Gt
Transmitting antenna gain in dBi
Gr
Receiving antenna gain in dBi
LFS
Free-space path loss in dB
Lsystem
Other system losses in dB

Additional losses must be considered for:

  • Building penetration
  • Vehicle penetration
  • Polarisation mismatch
  • Feeder and connector losses
  • Antenna orientation
  • Body absorption
  • Multipath fading

The link budget must provide an adequate fade margin for reliable mobile reception.

9.3Free-space path loss

The free-space path loss is given by:

FSPL (dB) = 32.44 + 20 log10(f) + 20 log10(d)

Where:

f
Frequency in MHz
d
Distance in kilometres

This equation provides a basic propagation estimate. Actual terrestrial coverage must also account for terrain, antenna height, diffraction and clutter.

Try the equations

Change any value to see the free-space path loss and the received power from the two equations above. The starting values are only an example.

Free-space path loss107.2 dB
Received power, Pr−60.2 dBm

A free-space estimate only. It leaves out terrain, antenna height, diffraction, clutter and fade margin.

9.4Antenna considerations

Mobile reception creates additional antenna design challenges. The receiving antenna must be compact, efficient and suitable for integration into a smartphone or compatible device. Important factors include:

  • Antenna efficiency
  • Radiation pattern
  • Polarisation
  • Impedance matching
  • Receiver sensitivity
  • Device orientation
  • Human-body effects

For the transmitting system, antenna height, gain, azimuth pattern, electrical and mechanical tilt and radiation characteristics are important for achieving the desired coverage.

9.5Interference and coexistence

D2M and mobile communication systems must operate without harmful interference. This requires proper RF filtering, transmitter spectral control, receiver selectivity, frequency coordination and field measurements.

Prasar Bharati’s published November 2025 test report is an important reference in this regard.

Section 10D2M and 5G: Competition or Complementary Technologies?

One of the most important questions is whether D2M will replace 5G mobile networks.

The answer is no. D2M and 5G serve different but complementary purposes.

ParameterD2M broadcastingConventional 5G mobile network
Communication modelOne-to-manyPrimarily one-to-one unicast, with multicast/broadcast capabilities
Internet requiredNoGenerally required for internet services
SIM requiredNo for D2M receptionNormally required for subscriber mobile services
Simultaneous viewersSame broadcast signal serves all receiversUnicast traffic increases with viewers
Interactive servicesLimited without a return channelExtensive
Live televisionHighly suitableSuitable through streaming
Emergency broadcastingCan operate independently of mobile data connectivityDepends on network availability and service configuration
Personalised contentLimited in the broadcast streamHighly suitable

D2M can distribute popular live content efficiently, while 5G can support interactive services and personalised content.